{"title":"Cases","description":"","products":[{"product_id":"case-trolley","title":"Case Trolley","description":"\u003cp\u003eLooking to add lightweight wheels and a pull out handle to your flight case? Our trolley system is the perfect solution. The brackets attach to the lid of your case and the trolley can easily clip on and off. This helps keep the weight of your case down for flying as you can remove the added weight of heavy corner casters and easily store the trolley in your carry on as well as make the case lighter as a whole by not having to make it as large to fit wheels and a handle on the inside (a bigger case)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 Uses for Our Trolley\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. Order it with your Blackout Case - \u003c\/strong\u003eAll our Blackout Cases have 6 screws pre-installed on their lids with machine threaded holes. Simply remove these screws and put them through the holes on the trolley's included mounting brackets and reinstall the screws. The mounting brackets are attached to the lid of your blackout case and you can clip your trolley on and off with the press of one button on the trolley and a small sliding motion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Installed on your Custom Shop Case. - \u003c\/strong\u003eBecause all our custom cases are made to order, when you add a trolley to your custom shop case order, we'll pre-install the brackets as part of the build process. Y\u003cspan data-mce-fragment=\"1\"\u003eou can clip your trolley on and off with the press of one button on the trolley and a small sliding motion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. DIY - \u003c\/strong\u003eGot a case already? Great. Purchase our trolley system and with a few holes added to your case, some T Nuts and Machine Screws, or nuts, bolts and washers you can add a trolley to your existing case. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote - The trolley should be screwed from the exterior of your case with a T-Nut or nut+washer on the inside of your case. You may need to pull back your foam to complete this. \u003c\/em\u003e\u003cem\u003eFor exceptionally long cases, please measure the length of your case and make sure the trolley will extend long enough to use. \u003c\/em\u003e\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":31986689245302,"sku":"TrolleyKit-1","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/products\/trolley.jpg?v=1597609980"},{"product_id":"custom-size-live-in-pedalboard-flight-case","title":"Custom Size Live-In Pedalboard Flight Case","description":"\u003cp\u003e\u003cstrong\u003e* Please See our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/creationmusiccompany.com\/pages\/build-times\" aria-describedby=\"a11y-new-window-message\" target=\"_blank\"\u003eBuild Times\u003c\/a\u003e page for the most up to date estimate. *\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur Live-In flight cases feature a shallow tray that your pedalboard sits in while the deep portion of the case acts as the lid. This way you can lift off the lid without ever needing to lift your pedalboard out of its case.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAll of our custom Live-In flight cases come standard with silver hardware, 4 butterfly latches and 2 recessed handles - one on the front and one on the end. You can customize your case with the options below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizations \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003eChoice of:\u003cbr\u003e- 3\/8\" Phenolic Coated Hexply Birch Plywood (Strongest Option)\u003cbr\u003e- 3\/8\" Polypropylene Flight Panel (Lightest Option - up to 40% lighter)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eClip On\/Off Trolley - This standalone trolley has small mounting brackets that we install on your lid and you can clip the trolley on and off as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAdd Corner Casters - This option is available for longer cases and are installed on the opposite side of the handle included with the case. These are heavy-duty wheels built into the case. This makes your case slightly larger on the exterior\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAdd Corner Casters + Pullout Handle - This option uses the same heavy-duty wheels but includes a telescoping handle on the opposite end. This is perfect for shorter cases or anyone wanting a longer handle to pull their case with. This makes your case slightly larger on the exterior. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCustom Blacked Out Hardware - We send your silver extrusion off to get a durable, black textured powder coat and install all black hardware on the case. \u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cem\u003e(May extend the lead time)\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCustomized Multi-Depth Foam in Lid - This is for pedalboards that use tiers or risers. To ensure your entire board is held snug we will add levels of foam to press firmly on every part of your pedalboard. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow To Measure Your Pedalboard\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen entering the dimensions for your pedalboard please account for the entire rig assembled. This means measuring from the floor to the top of your tallest pedal's knobs as well as accounting for any pedals that are overhanging your board by more than 1\/8\". Please give us the exact dimensions of your rig as you measure it and we will take care of making your case the perfect fit. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot Seeing What You Want?\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eWe are always happy to take special requests within reason. If you have an extra unique setup or have some big ideas that our standard options won't fulfill, feel free to reach out to us to see if its something we can accommodate.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e4 recessed butterfly latches - 2 on each side\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3\/8\" Polypropylene or 3\/8\" Birch Plywood\u003c\/li\u003e\n\u003cli\u003eAluminum double angle extrusion constuction\u003c\/li\u003e\n\u003cli\u003eOversized ball corner reinforcements\u003c\/li\u003e\n\u003cli\u003eRecessed handles and butterfly latches\u003c\/li\u003e\n\u003cli\u003eThick convoluted foam in lid for maximum pedal compression\u003c\/li\u003e\n\u003cli\u003eCustomizable options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"vendor-unknown","offers":[{"title":"4-5.5 inches \/ 12-20 inches \/ 7-13 inches","offer_id":32057173311606,"sku":"CUSTSZLIVECASE - 1","price":349.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 12-20 inches \/ 13.5-17 inches","offer_id":32057173344374,"sku":"CUSTSZLIVECASE - 2","price":369.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 12-20 inches \/ 17.5-22 inches","offer_id":32057173377142,"sku":"CUSTSZLIVECASE - 3","price":389.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 20.5-30 inches \/ 7-13 inches","offer_id":32057173409910,"sku":"CUSTSZLIVECASE - 4","price":384.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 20.5-30 inches \/ 13.5-17 inches","offer_id":32057173442678,"sku":"CUSTSZLIVECASE - 5","price":404.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 20.5-30 inches \/ 17.5-22 inches","offer_id":32057173475446,"sku":"CUSTSZLIVECASE - 6","price":424.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 30.5-40 inches \/ 7-13 inches","offer_id":32057173508214,"sku":"CUSTSZLIVECASE - 7","price":399.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 30.5-40 inches \/ 13.5-17 inches","offer_id":32057173540982,"sku":"CUSTSZLIVECASE - 8","price":419.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 30.5-40 inches \/ 17.5-22 inches","offer_id":32057173573750,"sku":"CUSTSZLIVECASE - 9","price":439.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 40.5-44 inches \/ 7-13 inches","offer_id":32057173606518,"sku":"CUSTSZLIVECASE - 10","price":409.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 40.5-44 inches \/ 13.5-17 inches","offer_id":32057173639286,"sku":"CUSTSZLIVECASE - 11","price":439.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 40.5-44 inches \/ 17.5-22 inches","offer_id":32057173672054,"sku":"CUSTSZLIVECASE - 12","price":459.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 12-20 inches \/ 7-13 inches","offer_id":32057173704822,"sku":"CUSTSZLIVECASE - 13","price":354.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 12-20 inches \/ 13.5-17 inches","offer_id":32057173737590,"sku":"CUSTSZLIVECASE - 14","price":374.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 12-20 inches \/ 17.5-22 inches","offer_id":32057173770358,"sku":"CUSTSZLIVECASE - 15","price":394.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 20.5-30 inches \/ 7-13 inches","offer_id":32057173803126,"sku":"CUSTSZLIVECASE - 16","price":389.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 20.5-30 inches \/ 13.5-17 inches","offer_id":32057173835894,"sku":"CUSTSZLIVECASE - 17","price":409.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 20.5-30 inches \/ 17.5-22 inches","offer_id":32057173868662,"sku":"CUSTSZLIVECASE - 18","price":429.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 30.5-40 inches \/ 7-13 inches","offer_id":32057173901430,"sku":"CUSTSZLIVECASE - 19","price":404.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 30.5-40 inches \/ 13.5-17 inches","offer_id":32057173934198,"sku":"CUSTSZLIVECASE - 20","price":424.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 30.5-40 inches \/ 17.5-22 inches","offer_id":32057173966966,"sku":"CUSTSZLIVECASE - 21","price":444.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 40.5-44 inches \/ 7-13 inches","offer_id":32057173999734,"sku":"CUSTSZLIVECASE - 22","price":424.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 40.5-44 inches \/ 13.5-17 inches","offer_id":32057174032502,"sku":"CUSTSZLIVECASE - 23","price":444.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 40.5-44 inches \/ 17.5-22 inches","offer_id":32057174065270,"sku":"CUSTSZLIVECASE - 24","price":464.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 12-20 inches \/ 7-13 inches","offer_id":32057174098038,"sku":"CUSTSZLIVECASE - 25","price":359.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 12-20 inches \/ 13.5-17 inches","offer_id":32057174130806,"sku":"CUSTSZLIVECASE - 26","price":379.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 12-20 inches \/ 17.5-22 inches","offer_id":32057174163574,"sku":"CUSTSZLIVECASE - 27","price":399.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 20.5-30 inches \/ 7-13 inches","offer_id":32057174196342,"sku":"CUSTSZLIVECASE - 28","price":394.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 20.5-30 inches \/ 13.5-17 inches","offer_id":32057174229110,"sku":"CUSTSZLIVECASE - 29","price":414.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 20.5-30 inches \/ 17.5-22 inches","offer_id":32057174261878,"sku":"CUSTSZLIVECASE - 30","price":434.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 30.5-40 inches \/ 7-13 inches","offer_id":32057174294646,"sku":"CUSTSZLIVECASE - 31","price":409.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 30.5-40 inches \/ 13.5-17 inches","offer_id":32057174327414,"sku":"CUSTSZLIVECASE - 32","price":429.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 30.5-40 inches \/ 17.5-22 inches","offer_id":32057174360182,"sku":"CUSTSZLIVECASE - 33","price":449.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 40.5-44 inches \/ 7-13 inches","offer_id":32057174392950,"sku":"CUSTSZLIVECASE - 34","price":429.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 40.5-44 inches \/ 13.5-17 inches","offer_id":32057174425718,"sku":"CUSTSZLIVECASE - 35","price":449.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 40.5-44 inches \/ 17.5-22 inches","offer_id":32057174458486,"sku":"CUSTSZLIVECASE - 36","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/products\/3454d3fadefc3a4a3db03915268fb616_1024x1024_2x_f1b55148-9914-4173-a02a-5e4bcf0d5134.jpg?v=1601051896"},{"product_id":"custom-size-drop-in-pedalboard-flight-case-1","title":"Custom Size Drop-In Pedalboard Flight Case","description":"\u003cp\u003e\u003cstrong\u003e* Please See our\u003cspan\u003e \u003c\/span\u003e\u003ca aria-describedby=\"a11y-new-window-message\" href=\"https:\/\/creationmusiccompany.com\/pages\/build-times\" target=\"_blank\"\u003eBuild Times\u003c\/a\u003e page for the most up to date estimate. *\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur Drop-In flight cases feature a deep case with a shallow hinged lid that closes down on top of your pedalboard. With this design you will lift your entire pedalboard in and out of the case. The advantages of the Drop-In design include the case being one piece that doesn't separate when open and the ability to add foam blocks under the board, which creates a cavity to store cables, DI boxes, straps, etc. \u003c\/p\u003e\n\u003cp\u003eAll of our custom Drop-In flight cases come standard with silver hardware, incredibly strong 3\/8\" hex-coated birch plywood, stay-hinges, 2 butterfly latches and 2 recessed handles - one on the front and one on the end. You can customize your case with the options below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizations \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003eChoice of:\u003cbr\u003e- 3\/8\" Phenolic Coated Hexply Birch Plywood (Strongest Option)\u003cbr\u003e- 3\/8\" Polypropylene Flight Panel (Lightest Option - up to 40% lighter)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eClip On\/Off Trolley - This standalone trolley has small mounting brackets that we install on your lid and you can clip the trolley on and off as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAdd Corner Casters - This option is available for longer cases and are installed on the opposite side of the handle included with the case. These are heavy-duty wheels built into the case. This makes your case slightly larger on the exterior\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAdd Corner Casters + Pullout Handle - This option uses the same heavy-duty wheels but includes a telescoping handle on the opposite end. This is perfect for shorter cases or anyone wanting a longer handle to pull their case with. This makes your case slightly larger on the exterior. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCustom Blacked Out Hardware - We send your silver extrusion off to get a durable, black textured powder coat and install all black hardware on the case. \u003cbr\u003e\u003cem\u003e(May extend the lead time)\u003c\/em\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCustom Foam Blocks for Storage - We make your case 2\" taller and give you foam blocks to set your board on creating storage underneath your pedalboard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCustomized Multi-Depth Foam in Lid - This is for pedalboards that use tiers or risers. To ensure your entire board is held snug we will add levels of foam to press firmly on every part of your pedalboard. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow To Measure Your Pedalboard\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen entering the dimensions for your pedalboard please account for the entire rig assembled. This means measuring from the floor to the top of your tallest pedal's knobs as well as accounting for any pedals that are overhanging your board by more than 1\/8\". Please give us the exact dimensions of your rig as you measure it and we will take care of making your case the perfect fit. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot Seeing What You Want?\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eWe are always happy to take special requests within reason. If you have an extra unique setup or have some big ideas that our standard options won't fulfill, feel free to reach out to us to see if its something we can accommodate.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e2 butterfly latches and stop hinges\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3\/8\" Polypropylene or 3\/8\" Birch Plywood\u003c\/li\u003e\n\u003cli\u003eAluminum double angle extrusion constuction\u003c\/li\u003e\n\u003cli\u003eOversized ball corner reinforcements\u003c\/li\u003e\n\u003cli\u003eRecessed handles and butterfly latches\u003c\/li\u003e\n\u003cli\u003eThick convoluted foam in lid for maximum pedal compression\u003c\/li\u003e\n\u003cli\u003eCustomizable options\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"vendor-unknown","offers":[{"title":"4-5.5 inches \/ 12-20 inches \/ 6-13 inches","offer_id":32061195714678,"sku":"CUSTSZDROPCASE - 1","price":349.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 12-20 inches \/ 13.5-17 inches","offer_id":32061195747446,"sku":"CUSTSZDROPCASE - 2","price":369.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 12-20 inches \/ 17.5-22 inches","offer_id":32061195780214,"sku":"CUSTSZDROPCASE - 3","price":389.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 20.5 -30 inches \/ 6-13 inches","offer_id":32061195812982,"sku":"CUSTSZDROPCASE - 4","price":384.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 20.5 -30 inches \/ 13.5-17 inches","offer_id":32061195845750,"sku":"CUSTSZDROPCASE - 5","price":404.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 20.5 -30 inches \/ 17.5-22 inches","offer_id":32061195878518,"sku":"CUSTSZDROPCASE - 6","price":424.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 30.5-40 inches \/ 6-13 inches","offer_id":32061195911286,"sku":"CUSTSZDROPCASE - 7","price":399.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 30.5-40 inches \/ 13.5-17 inches","offer_id":32061195944054,"sku":"CUSTSZDROPCASE - 8","price":419.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 30.5-40 inches \/ 17.5-22 inches","offer_id":32061195976822,"sku":"CUSTSZDROPCASE - 9","price":439.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 40.5-44 inches \/ 6-13 inches","offer_id":32061196009590,"sku":"CUSTSZDROPCASE - 10","price":409.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 40.5-44 inches \/ 13.5-17 inches","offer_id":32061196042358,"sku":"CUSTSZDROPCASE - 11","price":439.99,"currency_code":"USD","in_stock":true},{"title":"4-5.5 inches \/ 40.5-44 inches \/ 17.5-22 inches","offer_id":32061196075126,"sku":"CUSTSZDROPCASE - 12","price":459.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 12-20 inches \/ 6-13 inches","offer_id":32061196107894,"sku":"CUSTSZDROPCASE - 13","price":354.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 12-20 inches \/ 13.5-17 inches","offer_id":32061196140662,"sku":"CUSTSZDROPCASE - 14","price":374.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 12-20 inches \/ 17.5-22 inches","offer_id":32061196173430,"sku":"CUSTSZDROPCASE - 15","price":394.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 20.5 -30 inches \/ 6-13 inches","offer_id":32061196206198,"sku":"CUSTSZDROPCASE - 16","price":389.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 20.5 -30 inches \/ 13.5-17 inches","offer_id":32061196238966,"sku":"CUSTSZDROPCASE - 17","price":409.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 20.5 -30 inches \/ 17.5-22 inches","offer_id":32061196271734,"sku":"CUSTSZDROPCASE - 18","price":429.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 30.5-40 inches \/ 6-13 inches","offer_id":32061196304502,"sku":"CUSTSZDROPCASE - 19","price":404.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 30.5-40 inches \/ 13.5-17 inches","offer_id":32061196337270,"sku":"CUSTSZDROPCASE - 20","price":424.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 30.5-40 inches \/ 17.5-22 inches","offer_id":32061196370038,"sku":"CUSTSZDROPCASE - 21","price":444.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 40.5-44 inches \/ 6-13 inches","offer_id":32061196402806,"sku":"CUSTSZDROPCASE - 22","price":424.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 40.5-44 inches \/ 13.5-17 inches","offer_id":32061196435574,"sku":"CUSTSZDROPCASE - 23","price":444.99,"currency_code":"USD","in_stock":true},{"title":"6-7.5 inches \/ 40.5-44 inches \/ 17.5-22 inches","offer_id":32061196468342,"sku":"CUSTSZDROPCASE - 24","price":464.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 12-20 inches \/ 6-13 inches","offer_id":32061196501110,"sku":"CUSTSZDROPCASE - 25","price":359.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 12-20 inches \/ 13.5-17 inches","offer_id":32061196533878,"sku":"CUSTSZDROPCASE - 26","price":379.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 12-20 inches \/ 17.5-22 inches","offer_id":32061196566646,"sku":"CUSTSZDROPCASE - 27","price":399.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 20.5 -30 inches \/ 6-13 inches","offer_id":32061196599414,"sku":"CUSTSZDROPCASE - 28","price":394.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 20.5 -30 inches \/ 13.5-17 inches","offer_id":32061196632182,"sku":"CUSTSZDROPCASE - 29","price":414.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 20.5 -30 inches \/ 17.5-22 inches","offer_id":32061196664950,"sku":"CUSTSZDROPCASE - 30","price":434.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 30.5-40 inches \/ 6-13 inches","offer_id":32061196697718,"sku":"CUSTSZDROPCASE - 31","price":409.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 30.5-40 inches \/ 13.5-17 inches","offer_id":32061196730486,"sku":"CUSTSZDROPCASE - 32","price":429.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 30.5-40 inches \/ 17.5-22 inches","offer_id":32061196763254,"sku":"CUSTSZDROPCASE - 33","price":449.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 40.5-44 inches \/ 6-13 inches","offer_id":32061196796022,"sku":"CUSTSZDROPCASE - 34","price":429.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 40.5-44 inches \/ 13.5-17 inches","offer_id":32061196828790,"sku":"CUSTSZDROPCASE - 35","price":449.99,"currency_code":"USD","in_stock":true},{"title":"8-10 inches \/ 40.5-44 inches \/ 17.5-22 inches","offer_id":32061196861558,"sku":"CUSTSZDROPCASE - 36","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/products\/32_drop_1_104f7b4d-9274-462d-8f31-bc134b12889b.jpg?v=1601316198"},{"product_id":"pro-series-soft-case-18x12-5","title":"Pro Soft Case 18 lite","description":"\u003cp\u003eWhen designing our Pro Series Soft Cases, we cleared the drawing board started from scratch. We wanted to improve every aspect of our soft cases. First, we started with a thicker, smoother and more durable Nylon outer. Next we nearly tripled the padding to 15mm. We added a beaded edge all the way around with reinforced corners and rubber feet on the bottom. Additionally, we added the use of a water resistant zipper to help keep out any rain you get caught in. We added a full length seatbelt style strap, riveted on for strength,  a comfortable shoulder pad and improved metal clips. The handle is riveted and strap reinforced with comfortable padding. On the outer pocket we added a thin layer of padding so your accessories have protection. Inside, we added soft velvet to the lid that rests against your pedals. Finally, we improved the aesthetics with an embroidered logo and lightbulb branded rubber zipper toggles. \u003c\/p\u003e\n\u003cp\u003eOur Pro Series Soft Cases offer incredible protection for your investment and look absolutely stunning too. They are even a great upgrade case whether you use a creation pedalboard or another brand as they are in convenient common sizes.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThick Outer Nylon \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNearly 3X thicker Padding \u003c\/li\u003e\n\u003cli\u003eWater Resistant Zipper\u003c\/li\u003e\n\u003cli\u003eReinforced padded handle with rivet attachment\u003c\/li\u003e\n\u003cli\u003eReinforced edging with rubber corners\u003c\/li\u003e\n\u003cli\u003eRubber feet on bottom\u003c\/li\u003e\n\u003cli\u003ePadded full length outer pocket\u003c\/li\u003e\n\u003cli\u003eFull length strap bracing with rivet attachment\u003c\/li\u003e\n\u003cli\u003eSeatbelt style strap with padded shoulder brace\u003c\/li\u003e\n\u003cli\u003eEmbroidered logo\u003c\/li\u003e\n\u003cli\u003eLightbulb Logo Zipper Toggles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003eSize 18 lite - 18.5 x 7.5 x 4 inches\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":32135553155190,"sku":"PROSFTCASE 18lite","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/products\/DSC_0440_914104d0-6b33-4f2d-911c-254f00f80125.jpg?v=1605724021"},{"product_id":"pro-series-soft-case-32x16","title":"Pro Soft Case 32+","description":"\u003cp\u003eOur all new Pro Soft Case takes everything we loved about the previous version but with substantial upgrades that dramatically improve its quality and protection. We kept the best features from its predecessor like a ridiculously thick outer nylon fabric for durability, full width front pocket for maximum storage, plush velvet lined interior lid to be soft on your pedals, and our embroidered Creation logo for a pop of class. However, that's where it's similarities end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eWhat's new?\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eFor starters, in case it wasn't thick enough, we've nearly DOUBLED the thickness of the foam on this case from our previous version which was already almost 3x thicker than our original gig bag. For quick math, that's nearly 6X the padding of a normal gig bag style case. On top of that, we've added a new reinforcement panel on the top section  for handle to join to make the case more rigid where it carries weight. \u003c\/p\u003e\n\u003cp\u003eThis brings us to the redesigned handle. It's MASSIVE and wrapped in a thick, tightly woven seatbelt style material. A reinforcement strap goes through the middle and is stitched and riveted in line with the handle. Pedalboards are heavy. A handle that makes your grip secure is important. We've also used this same seatbelt style material for the shoulder strap and to attach the all metal clip rings in addition to adding extra heavy duty strap clips to attach to the case. \u003c\/p\u003e\n\u003cp\u003eNext, we've added a new cut resistant material to the inside walls of the case as well as increased the width and length of our cases slightly. some pedalboards are more rounded on the corners. Other boards are more square, and even have fairly sharp corners. We didn't design the cases to only be used with our own boards. We designed them to be an upgrade case for any board that fits inside them. The material for the inside walls makes sure the DIY flat board with sharp corners doesn't slice right through normal polyester. \u003c\/p\u003e\n\u003cp\u003eLastly, we've utilized an incredibly thick rubberized material on the case bottom, in attrition to the rubber feet. Where you usually load your gear isn't always a polished floor. This material helps make your case last and not get torn up when lining up your gear on a concrete parking lot while you pull the car around. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Nearly 6X thicker Padding (than traditional gig bags)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Cut Resistant Inside Wall Lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Strap Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Oversized Seatbelt Style Handle with Reinforcement Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Rubberized Material on Case Bottom\u003c\/li\u003e\n\u003cli\u003eThick Outer Nylon \u003c\/li\u003e\n\u003cli\u003eWater Resistant Zipper\u003c\/li\u003e\n\u003cli\u003eReinforced edging with rubber corners\u003c\/li\u003e\n\u003cli\u003eRubber feet on bottom\u003c\/li\u003e\n\u003cli\u003ePadded full length outer pocket\u003c\/li\u003e\n\u003cli\u003eFull length strap bracing with rivet attachment\u003c\/li\u003e\n\u003cli\u003eEmbroidered logo\u003c\/li\u003e\n\u003cli\u003eLightbulb Logo Zipper Toggles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003eSize 32 (32x16) - 32.5 x 16.5 x 6 inches\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003eFit: \u003c\/strong\u003e\u003cspan\u003eThis case is designed to fit Creation Music pedalboards size 32+ (32x16) as well as many other pedalboards from other brands. \u003c\/span\u003e\u003cspan\u003eThe case depth and flexible lid with extra thick padding is designed to accommodate most rigs at normal board height. (ex. flat board + pedals, flat boards + risers + pedals, angle boards with moderately tall pedals) However, some excessively tall rigs\u003c\/span\u003e\u003cspan\u003e (ex. angled boards + risers or flat boards + risers + \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eextremely tall pedals\u003c\/span\u003e\u003cspan\u003e) will likely not fit, or will not zip without causing damage to the zipper or pedals. The zipper should \u003c\/span\u003e\u003cem\u003enever\u003c\/em\u003e\u003cspan\u003e be forced closed. \u003c\/span\u003e\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":39576940937334,"sku":"PROSFTCASE32+","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/DSC00032.png?v=1698455072"},{"product_id":"used-31x20-live-in-board-and-case-bundle","title":"Used 31x20 Live-In Board and Case Bundle","description":"\u003cp\u003eUsed 31x20 Original Flat Series - Fair condition. Previously drilled for riser (Normally $175)\u003c\/p\u003e\n\u003cp\u003eUsed Live-In 31x20x6 Flight Case. Roman Numeral Custom Graphic- (Normally $444)\u003c\/p\u003e\n\u003cp\u003eNormal Price for New is $619. Closeout Price is $278.25\u003c\/p\u003e\n\u003cp\u003eTotal Weight 27.8 Lbs\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":39866580140150,"sku":"000006","price":278.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/products\/IMG_3148.jpg?v=1665507846"},{"product_id":"blackout-pedalboard-flight-case-18","title":"Blackout Pedalboard Flight Case 18","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003cu\u003e \u003c\/u\u003e\u003c\/h3\u003e\n\u003cp\u003eOur improved Blackout Pedalboard Flight Case 18 was designed to protect your pedalboard and all your pedals inside against the toughest situations. We use top grade hardware and latching, reinforce the edges with black anodized extrusion, and make it overbuilt like a tank with all 3\/8\" plywood construction coated in a black hex pattern for stunning looks.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Depth Block\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOur improved optional foam blocks are now the full width of the case interior creating support underneath the whole width of the pedalboard with an improved multi depth design. At 2x3 inches you can easily rotate the block to raise something incrementally at 2 inches or 3 inches. Add one block to raise up the short side of an angled pedalboard like our Elevation Series, or add two to create storage and raise up a flat pedalboard Like our Aero Series and create storage underneath\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/creationmusiccompany.com\/collections\/diy\/products\/case-trolley\" title=\"Add a Trolley to your case here\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eReady for a Trolley\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/a\u003eEvery case 28x14 and smaller have hardware pre-installed so that a trolley can easily be added with no need for any modification. All you need is a screw driver to remove the screws already in the lid, align the brackets with the holes, and re-install the screws. Then the trolley can clip on\/off with ease for easier transport from your car to venue or around an airport. You can also easily remove the trolley before checking your case for a flight to save weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for Aero 18 and Elevation 18 pedalboards (and other 18x12.5 boards)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAnodized black aluminum extrusion reinforced edges\u003c\/li\u003e\n\u003cli\u003ePowder coated black hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003e3\/8\" Coated hex pattern plywood construction\u003c\/li\u003e\n\u003cli\u003eOversized  ball corner reinforcements\u003c\/li\u003e\n\u003cli\u003eSpring loaded heavy duty handle on top and one side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003eImproved recessed butterfly latches\u003c\/li\u003e\n\u003cli\u003ePre-configured threaded holes to add removable trolley\u003c\/li\u003e\n\u003cli\u003e3\/8 inch EVA foam sides and bottom\u003c\/li\u003e\n\u003cli\u003e2-3\/8 Inch convoluted lid foam for maximum pedal compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003eOptional Multi Depth 2x3 inch full width EVA foam blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInside 18.5 x 13 x 5.375 inches foam to foam (lid foam compresses for 6.75 inches of maximum clearance)\u003c\/li\u003e\n\u003cli\u003eOptional Foam blocks raise boards 2 or 3 inches inside case.\u003c\/li\u003e\n\u003cli\u003eOutside (with rubber Feet) 21.25 x 15.325 x 9.125 inches\u003c\/li\u003e\n\u003cli\u003eWeight - 17 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeight - Will my board fit?\u003c\/strong\u003e\u003cbr\u003eThese cases are ultimately designed for an Elevation, an Aero using any extension feet, or an Aero+Riser using stock feet (not extensions) with moderately sized pedals at the highest point of each (ex. Strymon Bigsky). \u003c\/p\u003e\n\u003cp\u003eHowever, with the increase in popularity of rigs utilizing both risers AND extension feet, it is important to outline the maximum limitations of these cases. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWhile we have successfully closed the lid using the 40mm extension feet on an Aero and Riser with a Strymon Bigsky on top, it does requires pressure to push closed and excedes the recommended height. Setups of this height or taller should consider our custom size flight case options allowing us to tailor make a case that fits correctly. \u003c\/p\u003e\n\u003cp\u003eIf you plan to modify the foam on your own, the plywood construction is 8-1\/4\" wood to wood interior dimensions without foam, plus 3\/8\" rigid EVA foam (minimal compression) on the bottom. and 2-3\/8\" soft convoluted foam in the lid.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCondition - \u003c\/strong\u003eDue to the manufacturing process and\u003cspan\u003e \u003c\/span\u003ematerials used, minor marks in the aluminum from the tooling or slight imperfections in the plywood material are acceptable. It is impossible to have a flawless case. \u003c\/em\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eAll cases are sorted for quality. Cases with excessive marks or imperfections are separated and marked for B-Stock.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Pedalboards and trolley shown in photos are not included. \u003c\/em\u003e\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40169934061686,"sku":"BOFC18","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/DSC01499.png?v=1731445305"},{"product_id":"blackout-pedalboard-flight-case-24","title":"Blackout Pedalboard Flight Case 24","description":"\u003cp\u003eOur improved Blackout Pedalboard Flight Case 24 was designed to protect your pedalboard and all your pedals inside against the toughest situations. We use top grade hardware and latching, reinforce the edges with black anodized extrusion, and make it overbuilt like a tank with all 3\/8\" plywood construction coated in a black hex pattern for stunning looks.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Depth Block\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOur improved optional foam blocks are now the full width of the case interior creating support underneath the whole width of the pedalboard with an improved multi depth design. At 2x3 inches you can easily rotate the block to raise something incrementally at 2 inches or 3 inches. Add one block to raise up the short side of an angled pedalboard like our Elevation Series, or add two to create storage and raise up a flat pedalboard Like our Aero Series and create storage underneath\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-mce-fragment=\"1\" rel=\"noopener noreferrer\" title=\"Add a Trolley to your case here\" href=\"https:\/\/creationmusiccompany.com\/collections\/diy\/products\/case-trolley\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eReady for a Trolley\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/a\u003eEvery case 28x14 and smaller have hardware pre-installed so that a trolley can easily be added with no need for any modification. All you need is a screw driver to remove the screws already in the lid, align the brackets with the holes, and re-install the screws. Then the trolley can clip on\/off with ease for easier transport from your car to venue or around an airport. You can also easily remove the trolley before checking your case for a flight to save weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned for Aero 24 and Elevation 24 pedalboards (and other 24x12.5 boards)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAnodized black aluminum extrusion reinforced edges\u003c\/li\u003e\n\u003cli\u003ePowder coated black hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e*NEW* \u003c\/strong\u003e3\/8\" Coated hex pattern plywood construction\u003c\/li\u003e\n\u003cli\u003eOversized ball corner reinforcements\u003c\/li\u003e\n\u003cli\u003eSpring loaded heavy duty handle on top and one side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e*NEW* \u003c\/strong\u003eImproved recessed butterfly latches\u003c\/li\u003e\n\u003cli\u003ePre-configured threaded holes to add removable trolley\u003c\/li\u003e\n\u003cli\u003e1\/2 inch EVA foam sides and bottom\u003c\/li\u003e\n\u003cli\u003e2-1\/4 Inch convoluted lid foam for maximum pedal compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e*NEW* \u003c\/strong\u003eOptional Multi Depth 2x3 inch full width EVA foam blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInside 24.5 x 13 x 5.375 inches foam to foam (lid foam compresses for 6.75 inches of maximum clearance)\u003c\/li\u003e\n\u003cli\u003eOptional foam blocks raise boards 2 or 3 inches inside case.\u003c\/li\u003e\n\u003cli\u003eOutside (with rubber Feet) 27.25 x 15.325 x 9.125 inches\u003c\/li\u003e\n\u003cli\u003eWeight - 19.2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeight - Will my board fit?\u003c\/strong\u003e\u003cbr\u003eThese cases are ultimately designed for an Elevation, an Aero using any extension feet, or an Aero+Riser using stock feet (not extensions) with moderately sized pedals at the highest point of each (ex. Strymon Bigsky). \u003c\/p\u003e\n\u003cp\u003eHowever, with the increase in popularity of rigs utilizing both risers AND extension feet, it is important to outline the maximum limitations of these cases. \u003cmeta charset=\"utf-8\"\u003eWhile we have successfully closed the lid using the 40mm extension feet on an Aero and Riser with a Strymon Bigsky on top, it does requires pressure to push closed and excedes the recommended height. Setups of this height or taller should consider our custom size flight case options allowing us to tailor make a case that fits correctly. \u003c\/p\u003e\n\u003cp\u003eIf you plan to modify the foam on your own, the plywood construction is 8-1\/4\" wood to wood interior dimensions without foam, plus 3\/8\" rigid EVA foam (minimal compression) on the bottom. and 2-3\/8\" soft convoluted foam in the lid.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCondition - \u003c\/strong\u003eDue to the manufacturing process and\u003cspan\u003e \u003c\/span\u003ematerials used, minor marks in the aluminum from the tooling or slight imperfections in the plywood material are acceptable. It is impossible to have a flawless case. \u003c\/em\u003e\u003cspan\u003e\u003cem\u003eAll cases are sorted for quality. Cases with excessive marks or imperfections are separated and marked for B-Stock.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Pedalboards and trolley shown in photos are not included. \u003c\/em\u003e\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40170062413942,"sku":"BOFC24","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/DSC01491.png?v=1731445824"},{"product_id":"blackout-pedalboard-flight-case-25","title":"Blackout Pedalboard Flight Case 24+","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003cp\u003eOur improved Blackout Pedalboard Flight Case 24+ was designed to protect your pedalboard and all your pedals inside against the toughest situations. We use top grade hardware and latching, reinforce the edges with black anodized extrusion, and make it overbuilt like a tank with all 3\/8\" plywood construction coated in a black hex pattern for stunning looks.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Depth Block\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOur improved optional foam blocks are now the full width of the case interior creating support underneath the whole width of the pedalboard with an improved multi depth design. At 2x3 inches you can easily rotate the block to raise something incrementally at 2 inches or 3 inches. Add one block to raise up the short side of an angled pedalboard like our Elevation Series, or add two to create storage and raise up a flat pedalboard Like our Aero Series and create storage underneath\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Add a Trolley to your case here\" href=\"https:\/\/creationmusiccompany.com\/collections\/diy\/products\/case-trolley\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eReady for a Trolley\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/a\u003eEvery case 28x14 and smaller have hardware pre-installed so that a trolley can easily be added with no need for any modification. All you need is a screw driver to remove the screws already in the lid, align the brackets with the holes, and re-install the screws. Then the trolley can clip on\/off with ease for easier transport from your car to venue or around an airport. You can also easily remove the trolley before checking your case for a flight to save weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for Aero 24+ and Elevation 24+ pedalboards (and other 24x16 boards)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAnodized black aluminum extrusion reinforced edges\u003c\/li\u003e\n\u003cli\u003ePowder coated black hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003e3\/8\" Coated hex pattern plywood construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW*\u003c\/strong\u003e Oversized 6 rivet ball corner reinforcements\u003c\/li\u003e\n\u003cli\u003eSpring loaded heavy duty handle on top and one side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003eImproved recessed butterfly latches\u003c\/li\u003e\n\u003cli\u003ePre-configured threaded holes to add removable trolley\u003c\/li\u003e\n\u003cli\u003e1\/2 inch EVA foam sides and bottom\u003c\/li\u003e\n\u003cli\u003e2-1\/4 Inch convoluted lid foam for maximum pedal compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003eOptional Multi Depth 2x3 inch full width EVA foam blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInside 24.5 x 16.5 x 5.375 inches foam to foam (lid foam compresses for 6.75 inches of maximum clearance)\u003c\/li\u003e\n\u003cli\u003eOptional foam blocks raise boards 2 or 3 inches inside case.\u003c\/li\u003e\n\u003cli\u003eOutside (with rubber feet) 26.875 x 18.875 x 9.125\u003c\/li\u003e\n\u003cli\u003eWeight - 21 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeight - Will my board fit?\u003c\/strong\u003e\u003cbr\u003eThese cases are ultimately designed for an Elevation, an Aero using any extension feet, or an Aero+Riser using stock feet (not extensions) with moderately sized pedals at the highest point of each (ex. Strymon Bigsky). \u003c\/p\u003e\n\u003cp\u003eHowever, with the increase in popularity of rigs utilizing both risers AND extension feet, it is important to outline the maximum limitations of these cases. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWhile we have successfully closed the lid using the 40mm extension feet on an Aero and Riser with a Strymon Bigsky on top, it does requires pressure to push closed and excedes the recommended height. Setups of this height or taller should consider our custom size flight case options allowing us to tailor make a case that fits correctly. \u003c\/p\u003e\n\u003cp\u003eIf you plan to modify the foam on your own, the plywood construction is 8-1\/4\" wood to wood interior dimensions without foam, plus 3\/8\" rigid EVA foam (minimal compression) on the bottom. and 2-3\/8\" soft convoluted foam in the lid.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCondition - \u003c\/strong\u003eDue to the manufacturing process and\u003cspan\u003e \u003c\/span\u003ematerials used, minor marks in the aluminum from the tooling or slight imperfections in the plywood material are acceptable. It is impossible to have a flawless case. \u003c\/em\u003e\u003cspan\u003e\u003cem\u003eAll cases are sorted for quality. Cases with excessive marks or imperfections are separated and marked for B-Stock.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Pedalboards and trolley shown in photos are not included. \u003c\/em\u003e\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40170064511094,"sku":"BOFC24+","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/DSC01485.png?v=1731446363"},{"product_id":"blackout-pedalboard-flight-case-28","title":"Blackout Pedalboard Flight Case 28","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cem\u003e(Photos are previous version)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eOur improved Blackout Pedalboard Flight Case 28 was designed to protect your pedalboard and all your pedals inside against the toughest situations. We use top grade hardware and latching, reinforce the edges with black anodized extrusion, and make it overbuilt like a tank with all 3\/8\" plywood construction coated in a black hex pattern for stunning looks.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Depth Block\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eOur improved optional foam blocks are now the full width of the case interior creating support underneath the whole width of the pedalboard with an improved multi depth design. At 2x3 inches you can easily rotate the block to raise something incrementally at 2 inches or 3 inches. Add one block to raise up the short side of an angled pedalboard like our Elevation Series, or add two to create storage and raise up a flat pedalboard Like our Aero Series and create storage underneath\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/creationmusiccompany.com\/collections\/diy\/products\/case-trolley\" title=\"Add a Trolley to your case here\" data-mce-fragment=\"1\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eReady for a Trolley\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/a\u003eEvery case 28x14 and smaller have hardware pre-installed so that a trolley can easily be added with no need for any modification. All you need is a screw driver to remove the screws already in the lid, align the brackets with the holes, and re-install the screws. Then the trolley can clip on\/off with ease for easier transport from your car to venue or around an airport. You can also easily remove the trolley before checking your case for a flight to save weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned for Aero 28 and Elevation 28 pedalboards (and other 28x14 boards)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAnodized black aluminum extrusion reinforced edges\u003c\/li\u003e\n\u003cli\u003ePowder coated black hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e*NEW* \u003c\/strong\u003e3\/8\" Coated hex pattern plywood construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW*\u003c\/strong\u003e Oversized 6 rivet ball corner reinforcements\u003c\/li\u003e\n\u003cli\u003eSpring loaded heavy duty handle on top and one side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e*NEW* \u003c\/strong\u003eImproved recessed butterfly latches\u003c\/li\u003e\n\u003cli\u003ePre-configured threaded holes to add removable trolley\u003c\/li\u003e\n\u003cli\u003e1\/2 inch EVA foam sides and bottom\u003c\/li\u003e\n\u003cli\u003e2-1\/4 Inch convoluted lid foam for maximum pedal compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e*NEW* \u003c\/strong\u003eOptional Multi Depth 2x3 inch full width EVA foam blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInside 28.5 x 14.5 x 5.375 inches foam to foam (lid foam compresses for 6.75 inches of maximum clearance)\u003c\/li\u003e\n\u003cli\u003eOptional foam blocks raise boards 2 or 3 inches inside case.\u003c\/li\u003e\n\u003cli\u003eOutside (with rubber feet) 31.375 x 18.875 x 9.125\u003c\/li\u003e\n\u003cli\u003eWeight - 23 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeight - Will my board fit?\u003c\/strong\u003e\u003cbr\u003eThese cases are ultimately designed for an Elevation, an Aero using any extension feet, or an Aero+Riser using stock feet (not extensions) with moderately sized pedals at the highest point of each (ex. Strymon Bigsky). \u003c\/p\u003e\n\u003cp\u003eHowever, with the increase in popularity of rigs utilizing both risers AND extension feet, it is important to outline the maximum limitations of these cases. \u003cmeta charset=\"utf-8\"\u003eWhile we have successfully closed the lid using the 40mm extension feet on an Aero and Riser with a Strymon Bigsky on top, it does requires pressure to push closed and excedes the recommended height. Setups of this height or taller should consider our custom size flight case options allowing us to tailor make a case that fits correctly. \u003c\/p\u003e\n\u003cp\u003eIf you plan to modify the foam on your own, the plywood construction is 8-1\/4\" wood to wood interior dimensions without foam, plus 3\/8\" rigid EVA foam (minimal compression) on the bottom. and 2-3\/8\" soft convoluted foam in the lid.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCondition - \u003c\/strong\u003eDue to the manufacturing process and\u003cspan\u003e \u003c\/span\u003ematerials used, minor marks in the aluminum from the tooling or slight imperfections in the plywood material are acceptable. It is impossible to have a flawless case. \u003c\/em\u003e\u003cspan\u003e\u003cem\u003eAll cases are sorted for quality. Cases with excessive marks or imperfections are separated and marked for B-Stock.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Pedalboards and trolley shown in photos are not included. \u003c\/em\u003e\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40170064838774,"sku":"BOFC28","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/DSC01475.png?v=1731446313"},{"product_id":"blackout-pedalboard-flight-case-32","title":"Blackout Pedalboard Flight Case 32+","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003cp\u003eOur improved Blackout Pedalboard Flight Case 32+ was designed to protect your pedalboard and all your pedals inside against the toughest situations. We use top grade hardware and latching, reinforce the edges with black anodized extrusion, and make it overbuilt like a tank with all 3\/8\" plywood construction coated in a black hex pattern for stunning looks.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBuilt in Casters\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003cspan\u003eFor our latest version, we've built in heavy duty corner casters to give the ease of wheeling your pedalboard rig everywhere you go. These are the most rugged and durable corner casters available and will handle the weight of even the heaviest rig. On the opposite end, the recessed spring handle is conveniently placed to pull or push you case wherever you need to take it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Depth Block\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eOur improved optional foam blocks are now the full width of the case interior creating support underneath the whole width of the pedalboard with an improved multi depth design. At 2x3 inches you can easily rotate the block to raise something incrementally at 2 inches or 3 inches. Add one block to raise up the short side of an angled pedalboard like our Elevation Series, or add two to create storage and raise up a flat pedalboard Like our Aero Series and create storage underneath\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e*NEW*\u003c\/strong\u003e Built in heavy duty corner casters\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for Aero 32+ and Elevation 32+ pedalboards (and other 32x16 boards)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAnodized black aluminum extrusion reinforced edges\u003c\/li\u003e\n\u003cli\u003ePowder coated black hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003e3\/8\" Coated hex pattern plywood construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW*\u003c\/strong\u003e Oversized 6 rivet ball corner reinforcements\u003c\/li\u003e\n\u003cli\u003eSpring loaded heavy duty handle on top and one side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003eImproved recessed butterfly latches\u003c\/li\u003e\n\u003cli\u003e1\/2 inch EVA foam sides and bottom\u003c\/li\u003e\n\u003cli\u003e2-1\/4 Inch convoluted lid foam for maximum pedal compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*NEW* \u003c\/strong\u003eOptional Multi Depth 2x3 inch full width EVA foam blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInside - 32.5 x 16.5 x 5.375 inches foam to foam (lid foam compresses for 6.75 inches of maximum clearance)\u003c\/li\u003e\n\u003cli\u003eOptional foam blocks raise boards 2 or 3 inches inside case.\u003c\/li\u003e\n\u003cli\u003eOutside - (with rubber feet) 35 x 18.875 x 9.125\u003c\/li\u003e\n\u003cli\u003eWeight - 27.6 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeight - Will my board fit?\u003c\/strong\u003e\u003cbr\u003eThese cases are ultimately designed for an Elevation, an Aero using any extension feet, or an Aero+Riser using stock feet (not extensions) with moderately sized pedals at the highest point of each (ex. Strymon Bigsky). \u003c\/p\u003e\n\u003cp\u003eHowever, with the increase in popularity of rigs utilizing both risers AND extension feet, it is important to outline the maximum limitations of these cases. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWhile we have successfully closed the lid using the 40mm extension feet on an Aero and Riser with a Strymon Bigsky on top, it does requires pressure to push closed and excedes the recommended height. Setups of this height or taller should consider our custom size flight case options allowing us to tailor make a case that fits correctly. \u003c\/p\u003e\n\u003cp\u003eIf you plan to modify the foam on your own, the plywood construction is 8-1\/4\" wood to wood interior dimensions without foam, plus 3\/8\" rigid EVA foam (minimal compression) on the bottom. and 2-3\/8\" soft convoluted foam in the lid.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCondition - \u003c\/strong\u003eDue to the manufacturing process and\u003cspan\u003e \u003c\/span\u003ematerials used, minor marks in the aluminum from the tooling or slight imperfections in the plywood material are acceptable. It is impossible to have a flawless case. \u003c\/em\u003e\u003cspan\u003e\u003cem\u003eAll cases are sorted for quality. Cases with excessive marks or imperfections are separated and marked for B-Stock.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Pedalboards and trolley shown in photos are not included. \u003c\/em\u003e\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40170066051190,"sku":"BOFC32+","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/DSC01461.png?v=1731446856"},{"product_id":"pro-soft-case-28","title":"Pro Soft Case 28","description":"\u003cp\u003eOur all new Pro Soft Case takes everything we loved about the previous version but with substantial upgrades that dramatically improve its quality and protection. We kept the best features from its predecessor like a ridiculously thick outer nylon fabric for durability, full width front pocket for maximum storage, plush velvet lined interior lid to be soft on your pedals, and our embroidered Creation logo for a pop of class. However, that's where it's similarities end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWhat's new?\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eFor starters, in case it wasn't thick enough, we've nearly DOUBLED the thickness of the foam on this case from our previous version which was already almost 3x thicker than our original gig bag. For quick math, that's nearly 6X the padding of a normal gig bag style case. On top of that, we've added a new reinforcement panel on the top section  for handle to join to make the case more rigid where it carries weight. \u003c\/p\u003e\n\u003cp\u003eThis brings us to the redesigned handle. It's MASSIVE and wrapped in a thick, tightly woven seatbelt style material. A reinforcement strap goes through the middle and is stitched and riveted in line with the handle. Pedalboards are heavy. A handle that makes your grip secure is important. We've also used this same seatbelt style material for the shoulder strap and to attach the all metal clip rings in addition to adding extra heavy duty strap clips to attach to the case. \u003c\/p\u003e\n\u003cp\u003eNext, we've added a new cut resistant material to the inside walls of the case as well as increased the width and length of our cases slightly. some pedalboards are more rounded on the corners. Other boards are more square, and even have fairly sharp corners. We didn't design the cases to only be used with our own boards. We designed them to be an upgrade case for any board that fits inside them. The material for the inside walls makes sure the DIY flat board with sharp corners doesn't slice right through normal polyester. \u003c\/p\u003e\n\u003cp\u003eLastly, we've utilized an incredibly thick rubberized material on the case bottom, in attrition to the rubber feet. Where you usually load your gear isn't always a polished floor. This material helps make your case last and not get torn up when lining up your gear on a concrete parking lot while you pull the car around. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Nearly 6X thicker Padding \u003cem\u003e(than traditional gig bags)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Cut Resistant Inside Wall Lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Strap Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Oversized Seatbelt Style Handle with Reinforcement Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Rubberized Material on Case Bottom\u003c\/li\u003e\n\u003cli\u003eThick Outer Nylon \u003c\/li\u003e\n\u003cli\u003eWater Resistant Zipper\u003c\/li\u003e\n\u003cli\u003eReinforced edging with rubber corners\u003c\/li\u003e\n\u003cli\u003eRubber feet on bottom\u003c\/li\u003e\n\u003cli\u003ePadded full length outer pocket\u003c\/li\u003e\n\u003cli\u003eFull length strap bracing with rivet attachment\u003c\/li\u003e\n\u003cli\u003eEmbroidered logo\u003c\/li\u003e\n\u003cli\u003eLightbulb Logo Zipper Toggles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003eSize 28 (28x14) - 28.5 x 14.5 x 6 inches\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eFit: \u003c\/strong\u003e\u003cspan\u003eThis case is designed to fit Creation Music pedalboards size 28 (28x14) as well as many other pedalboards from other brands. \u003c\/span\u003e\u003cspan\u003eThe case depth and flexible lid with extra thick padding is designed to accommodate most rigs at normal board height. (ex. flat board + pedals, flat boards + risers + pedals, angle boards with moderately tall pedals) However, some excessively tall rigs\u003c\/span\u003e\u003cspan\u003e (ex. angled boards + risers or flat boards + risers + \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextremely tall pedals\u003c\/span\u003e\u003cspan\u003e) will likely not fit, or will not zip without causing damage to the zipper or pedals. The zipper should \u003c\/span\u003e\u003cem\u003enever\u003c\/em\u003e\u003cspan\u003e be forced closed. \u003c\/span\u003e\u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40248751554678,"sku":"PROSFTCASE28","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/SC24-2_75128081-ad57-45c7-85dd-73f6b3d5ccd8.jpg?v=1731103409"},{"product_id":"pro-soft-case-24","title":"Pro Soft Case 24+","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003cp\u003eOur all new Pro Soft Case takes everything we loved about the previous version but with substantial upgrades that dramatically improve its quality and protection. We kept the best features from its predecessor like a ridiculously thick outer nylon fabric for durability, full width front pocket for maximum storage, plush velvet lined interior lid to be soft on your pedals, and our embroidered Creation logo for a pop of class. However, that's where it's similarities end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWhat's new?\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eFor starters, in case it wasn't thick enough, we've nearly DOUBLED the thickness of the foam on this case from our previous version which was already almost 3x thicker than our original gig bag. For quick math, that's nearly 6X the padding of a normal gig bag style case. On top of that, we've added a new reinforcement panel on the top section  for handle to join to make the case more rigid where it carries weight. \u003c\/p\u003e\n\u003cp\u003eThis brings us to the redesigned handle. It's MASSIVE and wrapped in a thick, tightly woven seatbelt style material. A reinforcement strap goes through the middle and is stitched and riveted in line with the handle. Pedalboards are heavy. A handle that makes your grip secure is important. We've also used this same seatbelt style material for the shoulder strap and to attach the all metal clip rings in addition to adding extra heavy duty strap clips to attach to the case. \u003c\/p\u003e\n\u003cp\u003eNext, we've added a new cut resistant material to the inside walls of the case as well as increased the width and length of our cases slightly. some pedalboards are more rounded on the corners. Other boards are more square, and even have fairly sharp corners. We didn't design the cases to only be used with our own boards. We designed them to be an upgrade case for any board that fits inside them. The material for the inside walls makes sure the DIY flat board with sharp corners doesn't slice right through normal polyester. \u003c\/p\u003e\n\u003cp\u003eLastly, we've utilized an incredibly thick rubberized material on the case bottom, in attrition to the rubber feet. Where you usually load your gear isn't always a polished floor. This material helps make your case last and not get torn up when lining up your gear on a concrete parking lot while you pull the car around. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Nearly 6X thicker Padding \u003cem\u003e(than traditional gig bags)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Cut Resistant Inside Wall Lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Strap Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Oversized Seatbelt Style Handle with Reinforcement Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Rubberized Material on Case Bottom\u003c\/li\u003e\n\u003cli\u003eThick Outer Nylon \u003c\/li\u003e\n\u003cli\u003eWater Resistant Zipper\u003c\/li\u003e\n\u003cli\u003eReinforced edging with rubber corners\u003c\/li\u003e\n\u003cli\u003eRubber feet on bottom\u003c\/li\u003e\n\u003cli\u003ePadded full length outer pocket\u003c\/li\u003e\n\u003cli\u003eFull length strap bracing with rivet attachment\u003c\/li\u003e\n\u003cli\u003eEmbroidered logo\u003c\/li\u003e\n\u003cli\u003eLightbulb Logo Zipper Toggles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003eSize 24+ (24x16) - 24.5 x 16.5 x 6 inches\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eFit: \u003c\/strong\u003eThis case is designed to fit Creation Music pedalboards size 24+ (24x16) as well as many other pedalboards from other brands. The case depth and flexible lid with extra thick padding is designed to accommodate most rigs at normal board height. (ex. flat board + pedals, flat boards + risers + pedals, angle boards with moderately tall pedals) However, some excessively tall rigs (ex. angled boards + risers or flat boards + risers + \u003cspan style=\"text-decoration: underline;\"\u003eextremely tall pedals\u003c\/span\u003e) will likely not fit, or will not zip without causing damage to the zipper or pedals. The zipper should \u003cem\u003enever\u003c\/em\u003e be forced closed. \u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40248756043894,"sku":"PROSFTCASE24+","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/SC24.jpg?v=1731103339"},{"product_id":"pro-soft-case-25","title":"Pro Soft Case 24","description":"\u003cp\u003eOur all new Pro Soft Case takes everything we loved about the previous version but with substantial upgrades that dramatically improve its quality and protection. We kept the best features from its predecessor like a ridiculously thick outer nylon fabric for durability, full width front pocket for maximum storage, plush velvet lined interior lid to be soft on your pedals, and our embroidered Creation logo for a pop of class. However, that's where it's similarities end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWhat's new?\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eFor starters, in case it wasn't thick enough, we've nearly DOUBLED the thickness of the foam on this case from our previous version which was already almost 3x thicker than our original gig bag. For quick math, that's nearly 6X the padding of a normal gig bag style case. On top of that, we've added a new reinforcement panel on the top section  for handle to join to make the case more rigid where it carries weight. \u003c\/p\u003e\n\u003cp\u003eThis brings us to the redesigned handle. It's MASSIVE and wrapped in a thick, tightly woven seatbelt style material. A reinforcement strap goes through the middle and is stitched and riveted in line with the handle. Pedalboards are heavy. A handle that makes your grip secure is important. We've also used this same seatbelt style material for the shoulder strap and to attach the all metal clip rings in addition to adding extra heavy duty strap clips to attach to the case. \u003c\/p\u003e\n\u003cp\u003eNext, we've added a new cut resistant material to the inside walls of the case as well as increased the width and length of our cases slightly. some pedalboards are more rounded on the corners. Other boards are more square, and even have fairly sharp corners. We didn't design the cases to only be used with our own boards. We designed them to be an upgrade case for any board that fits inside them. The material for the inside walls makes sure the DIY flat board with sharp corners doesn't slice right through normal polyester. \u003c\/p\u003e\n\u003cp\u003eLastly, we've utilized an incredibly thick rubberized material on the case bottom, in attrition to the rubber feet. Where you usually load your gear isn't always a polished floor. This material helps make your case last and not get torn up when lining up your gear on a concrete parking lot while you pull the car around. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Nearly 6X thicker Padding \u003cem\u003e(than traditional gig bags)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Cut Resistant Inside Wall Lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Strap Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Oversized Seatbelt Style Handle with Reinforcement Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Rubberized Material on Case Bottom\u003c\/li\u003e\n\u003cli\u003eThick Outer Nylon \u003c\/li\u003e\n\u003cli\u003eWater Resistant Zipper\u003c\/li\u003e\n\u003cli\u003eReinforced edging with rubber corners\u003c\/li\u003e\n\u003cli\u003eRubber feet on bottom\u003c\/li\u003e\n\u003cli\u003ePadded full length outer pocket\u003c\/li\u003e\n\u003cli\u003eFull length strap bracing with rivet attachment\u003c\/li\u003e\n\u003cli\u003eEmbroidered logo\u003c\/li\u003e\n\u003cli\u003eLightbulb Logo Zipper Toggles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003eSize 24 (24x12.5) - 24.5 x 13 x 6 inches\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eFit: \u003c\/strong\u003eThis case is designed to fit Creation Music pedalboards size 24 (24x12.5) as well as many other pedalboards from other brands. The case depth and flexible lid with extra thick padding is designed to accommodate most rigs at normal board height. (ex. flat board + pedals, flat boards + risers + pedals, angle boards with moderately tall pedals) However, some excessively tall rigs (ex. angled boards + risers or flat boards + risers + \u003cspan style=\"text-decoration: underline;\"\u003eextremely tall pedals\u003c\/span\u003e) will likely not fit, or will not zip without causing damage to the zipper or pedals. The zipper should \u003cem\u003enever\u003c\/em\u003e be forced closed. \u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40248804180086,"sku":"PROSFTCASE24","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/SC24_f2cdb20f-eb23-4fab-926c-c75dbfb0a6d0.jpg?v=1731103535"},{"product_id":"pro-soft-case-18","title":"Pro Soft Case 18","description":"\u003cp\u003eOur all new Pro Soft Case takes everything we loved about the previous version but with substantial upgrades that dramatically improve its quality and protection. We kept the best features from its predecessor like a ridiculously thick outer nylon fabric for durability, full width front pocket for maximum storage, plush velvet lined interior lid to be soft on your pedals, and our embroidered Creation logo for a pop of class. However, that's where it's similarities end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWhat's new?\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eFor starters, in case it wasn't thick enough, we've nearly DOUBLED the thickness of the foam on this case from our previous version which was already almost 3x thicker than our original gig bag. For quick math, that's nearly 6X the padding of a normal gig bag style case. On top of that, we've added a new reinforcement panel on the top section  for handle to join to make the case more rigid where it carries weight. \u003c\/p\u003e\n\u003cp\u003eThis brings us to the redesigned handle. It's MASSIVE and wrapped in a thick, tightly woven seatbelt style material. A reinforcement strap goes through the middle and is stitched and riveted in line with the handle. Pedalboards are heavy. A handle that makes your grip secure is important. We've also used this same seatbelt style material for the shoulder strap and to attach the all metal clip rings in addition to adding extra heavy duty strap clips to attach to the case. \u003c\/p\u003e\n\u003cp\u003eNext, we've added a new cut resistant material to the inside walls of the case as well as increased the width and length of our cases slightly. some pedalboards are more rounded on the corners. Other boards are more square, and even have fairly sharp corners. We didn't design the cases to only be used with our own boards. We designed them to be an upgrade case for any board that fits inside them. The material for the inside walls makes sure the DIY flat board with sharp corners doesn't slice right through normal polyester. \u003c\/p\u003e\n\u003cp\u003eLastly, we've utilized an incredibly thick rubberized material on the case bottom, in attrition to the rubber feet. Where you usually load your gear isn't always a polished floor. This material helps make your case last and not get torn up when lining up your gear on a concrete parking lot while you pull the car around. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Nearly 6X thicker Padding \u003cem\u003e(than traditional gig bags)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Cut Resistant Inside Wall Lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Strap Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Oversized Seatbelt Style Handle with Reinforcement Strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e*New*\u003c\/strong\u003e Heavy Duty Rubberized Material on Case Bottom\u003c\/li\u003e\n\u003cli\u003eThick Outer Nylon \u003c\/li\u003e\n\u003cli\u003eWater Resistant Zipper\u003c\/li\u003e\n\u003cli\u003eReinforced edging with rubber corners\u003c\/li\u003e\n\u003cli\u003eRubber feet on bottom\u003c\/li\u003e\n\u003cli\u003ePadded full length outer pocket\u003c\/li\u003e\n\u003cli\u003eFull length strap bracing with rivet attachment\u003c\/li\u003e\n\u003cli\u003eEmbroidered logo\u003c\/li\u003e\n\u003cli\u003eLightbulb Logo Zipper Toggles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003eSize 18 (18x12.5) - 18.5 x 13 x 6 inches\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eFit: \u003c\/strong\u003eThis case is designed to fit Creation Music pedalboards size 18 (18x12.5) as well as many other pedalboards from other brands. The case depth and flexible lid with extra thick padding is designed to accommodate most rigs at normal board height. (ex. flat board + pedals, flat boards + risers + pedals, angle boards with moderately tall pedals) However, some excessively tall rigs (ex. angled boards + risers or flat boards + risers + \u003cspan style=\"text-decoration: underline;\"\u003eextremely tall pedals\u003c\/span\u003e) will likely not fit, or will not zip without causing damage to the zipper or pedals. The zipper should \u003cem\u003enever\u003c\/em\u003e be forced closed. \u003c\/p\u003e","brand":"Creation Music Company","offers":[{"title":"Default Title","offer_id":40248805490806,"sku":"PROSFTCASE18","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0034\/4270\/4502\/files\/SC18nostrap.jpg?v=1731103187"}],"url":"https:\/\/creationmusiccompany.com\/collections\/cases\/custom-flight-cases.oembed","provider":"Creation Music Company","version":"1.0","type":"link"}