The photos shown at this time are of our 24x12.5 model. So a diagram of the top deck layout has been included for reference. The width shown is 31" because the end panels are 1/2" thick and combined add the additional inch for 32"
The Elevation Series
To elevate means to rise above, raise the bar, or in the case of a pedalboard, raise off the ground. (As opposed to our Flat Series pedalboard, which is, of course, flat) This is precisely what we achieved during the design process of this product; a process that we put a great deal of time and effort into for something that is seemingly simple yet is actually groundbreaking for the pedalboard world. We obsessed over every little detail and believe The Elevation Series is unlike any other pedalboard we have put forward in the past.
It all starts with our breakthrough Unibody design. This design is stronger, more enduring, and has more space underneath than past designs. The Unibody has the strength to last practically a lifetime. It is completely self supporting all on it’s own without our end panels with the incredible strength that comes from it’s unique turned down edges. This also allows us to offer replaceable end panels so you can change your color or I/O configuration later on. You can pick your size and not look back. This sleek and modern design is revolutionizing the pedalboard world.
- Our Proprietary Unibody design for superior strength
- Customizable end panels
- A wide array of tolex and wood finishes to choose from
- Optional handles with choice of finish
- Optional Power and I/O configurations
- Replaceable end panels
- Total Height: 3-7/8” heel and 2-1/8” toe
- Total Depth: 16”
- Total Width: 32” (with end panels) 31” unibody alone
- Total Weight: Approx 7 lbs (Varies by end panels and I/Os)
FAQ and Info:
Electrosocket (No Lead): This option means we have installed an electrosocket into the side of the end panel. An electrosocket alone is not a connection, simply a jack plate. You must order a lead cable separately HERE to screw into the electrosocket to make a completed connection.
AC Inlet: An AC Inlet can be seen in the demonstration video HERE. This unit brings AC Current to the board with a standard edison style plug. The rear side MUST have the required AC cord added to connect to a power supply or outlet strip as shown in our instructional video.
IEC Connection: With the release of this design, we wanted to improve our IEC option to be even more reliable. We have opted for an improved IEC unit with a switch built into the same box. This allows for a much cleaner look on the inside with no visible wiring. Each IEC unit has an IEC cable soldered to the rear of of the unit and then a rubber boot fastened over the whole unit to make a self contained unit. The cable feeds under the pedalboard and plugs into most power supplies on today’s market. For other connections we offer various adapters as well.
XLR Pass Through: This is a module that has no lead connection. It’s essentially a D Mount style adapter mounted to the side of the board. Typically Male Outer is used as an OUT connection for things such as DI Boxes on pedalboards for acoustic rigs. the Female Outer is typically used to accept XLR cables coming in for things like Vocal Mics.
How do I mount my power supply underneath? Do you offer a kit? The kit we currently offer is for mounting power supplies to a wooden pedalboard deck. We are considering a mount for the future, however, because of the smooth design of this pedalboard we have found that 3M ® Dual Lock® work incredibly well and is also a very flexible option. Traditional Hook and Loop will also work well, but for heavier power supplies mounting upside down isn’t ideal.
Adding a Power Supply: When you choose this option, you are buying a brand new model of the power supply you selected and we are pre-installing it on your board for free. When you select this option in conjunction with a power connection, we will also pre-wire your power supply for you.
Finish Options and Badges: When a tolex or tweed option is selected, by default we will install our standard black metal bade to the unibody. When a Hardwood option is chosen, we will cut a matching engraved hardwood badge to go with it.
How can I replace my end Panels? The end panels are fastened with wood screws. Simply unscrew, align new end panel, and screw into pilot holes that have been pre-drilled and marked.