*Build Times: Please See our Build Times page for the most up to date estimate.
This isn't your run of the mill case. It's made from 3/8 Polypropylene Honeycomb panels and is laminated in Black ABS to endure the rigors of the road. These panels are up to 40% lighter than regular birch paneling. It's made as a drop in style case for both our Elevation and Flat Series pedalboards. Drop-In means a deep tray and a shallow lid. You "Drop" or lower your pedalboard into the deeper tray. While these cases are designed for Creation branded pedalboards they can also be used for a multitude of other pedalboards from other companies.
Want wheels and a handle?
Easy. Simply add the removable trolley option and we'll pre-install it. This convenient system has two wheels and a telescoping handle that clip onto two brackets we install on the exterior of the case. This is exceptionally convenient when traveling through airports, but even more important, this option doesn't add excess weight and bulk to your case. So, instead of worrying about that 50 lb airline weight limit, and having to choose between your 2 favorite fuzz pedals and wheels, now you can have both. Just remove the wheel trolley when you check your case at the baggage counter, collapse and stow in your carry on. You'll be the envy of the other guitar players on tour who are opening their case and pulling pedals off their board.
Add Foam Risers?
As mentioned, this case is able to be used for either an Elevation or Flat Series board. Obviously a flat series is much shorter than an Elevation or any other angled board. For this reason, we offer removable foam risers which raise the flat board up so that the lid foam better compresses against it. As an added bonus, the risers then create a storage compartment in the empty space below. Want to use a flat board with a tier? No problem. Remove the foam risers to allow the flat board to go all the way to the bottom of the case for that additional needed clearance.
- 3/8" Polypropylene Honeycomb panels (up to 40% lighter)
- Aluminum double angle extrusion constuction
- Oversized ball corner reinforcements
- Recessed handles and butterfly latches
- Thick convoluted foam in lid for maximum pedal compression
- Optional detachable wheel trolley with telescoping handle
- Optional foam risers for flat board use
- Empty weight is 16 pounds.
- External dimensions are 27.5 x 19.5 x 8.75 inches
- Internal dimensions are 24.5 x 16.5 x 5.25 inches foam to foam with at least 1 inch of compression available in the convoluted foam.