* Please See our Build Times page for the most up to date estimate.
Made to be added to our Flat Series boards, this tier is the perfect way to make the most of your pedalboard space. With enough room underneath to fit just about any power supply or pedal, you can easily cover the things you don't need constant access to and shrink the foot board of your flat board.
The tier is made identically like our Flat Series boards with Phenolic Birch Plywood and aluminum extrusion around the sides, but with additional extrusion below to allow you to attach to your board with space. You can choose to have this pre-installed on a Flat Series, or drill and install yourself where you want it if you're not sure about placement until you put it all together. We'll pre-drill the aluminum and provide the nuts/bolts to attach, you just drill the board.
Available in pre-configured sizes or for a small fee choose "Custom" and we'll size it for your requested dimensions. (excessively large tiers are subject to additional fees).
Dimensions: The TOTAL size of the tier width and length, including the aluminum trim (which is .5 inches wide and .5 inches tall). There is approximately 2.5 inches of clearance between the pedalboard surface and the underside of the tier's aluminum edge.
Finish: The aluminum is a black anodized coating on all the aluminum. When cut, it does expose the raw aluminum. Where these edges are visible, we use a textured durable coating applied by hand to make the surface black.
Condition - Due to the manufacturing process and materials used, minor marks in the aluminum from the tools or slight lines or waviness in the plywood material are acceptable. It is impossible to have a flawless board.
All boards are sorted for quality. Boards with excessive marks or imperfections in the plywood are separated and marked for B-Stock.