Our improved Blackout Pedalboard Flight Case 28 was designed to protect your pedalboard and all your pedals inside against the toughest situations. We use top grade hardware and latching, reinforce the edges with black anodized extrusion, and make it overbuilt like a tank with all 3/8" plywood construction coated in a black hex pattern for stunning looks.
Multi Depth Block Our improved optional foam blocks are now the full width of the case interior creating support underneath the whole width of the pedalboard with an improved multi depth design. At 2x3 inches you can easily rotate the block to raise something incrementally at 2 inches or 3 inches. Add one block to raise up the short side of an angled pedalboard like our Elevation Series, or add two to create storage and raise up a flat pedalboard Like our Aero Series and create storage underneath
Ready for a Trolley Every case 28x14 and smaller have hardware pre-installed so that a trolley can easily be added with no need for any modification. All you need is a screw driver to remove the screws already in the lid, align the brackets with the holes, and re-install the screws. Then the trolley can clip on/off with ease for easier transport from your car to venue or around an airport. You can also easily remove the trolley before checking your case for a flight to save weight.
Features
Designed for Aero 28 and Elevation 28 pedalboards (and other 28x14 boards)
Anodized black aluminum extrusion reinforced edges
Powder coated black hardware
*NEW* 3/8" Coated hex pattern plywood construction
Outside (with rubber feet) 26.875 x 18.875 x 9.125
Weight - 23 lbs
Condition - Due to the manufacturing process andmaterials used, minor marks in the aluminum from the tooling or slight imperfections in the plywood material are acceptable. It is impossible to have a flawless case. All cases are sorted for quality. Cases with excessive marks or imperfections are separated and marked for B-Stock.
*Pedalboards and trolley shown in photos are not included.
